Deep Groove Single Row Radial Ball Bearing
*** Listing is for 1 bearing sold out of a brand new bulk case. Please see actual pictures.
Bore Diameter: 17 mm ID
Outside Diameter: 40 mm OD
Width: 12 mm
Internal Clearance: C3 – (***In most electric motor rebuild applications a C3 clearance can be used in place of a normal clearance.)
LLU (better for suspension pivots)
Double Sealed (Contact Polyacrylic Rubber Seal)
The key properties of Polyacrylic are its resistance to hot hydraulic oil and oxidation.
It is also resistant to ozone and weathering and in these respects it is much superior to Nitrile Rubber. Typical applications include automotive components requiring resistance to hot oil or fuel.
Greater than- Normal (C3) clearance bearings are commonly used to avoid too little internal bearing clearance in operation. Bearings having greater-than-Normal unmounted clearance are used if the bearings are fitted on the shaft or in the housing with tighter-than-Normal interference fits, if the inner and outer ring are each mounted with an interference fit, or if heat may be conducted to the bearings from an external source such as a high temperature fan gas or a pumped fluid. Greater-than-Normal internal radial clearance may be necessary when bearing speed is high and high bearing temperature is expected.
Deep Groove Ball Bearing
High Carbon Chrome Steel
Limiting Speed – Grease
ISO Class 0
Radial Internal Clearance
Static Load Rating
1030 lbf4600 N4.60 kN
Dynamic Load Rating
2160 lbf9600 N9.60 kN
0.141 lb0.064 kg
Operating Temperature Range
-40 to 250 ºF-40 to 120 ºC